Important characteristics
--Support both GPS and SBAS signals in one device.
--Comprehensive control of signal content and dynamic characteristics.
--Comprehensive user-defined data messages when using SimCHAN software.
--Stable and accurate all digital FPGA architecture.
--Industry standard GPIB (compatible with STR4775 products).
--Low cost.
--Provide mounting rack.
Specifications
output frequency
--Rated output frequency L1@1575.42MHz
--Doppler Range± 15,000m/s
--Stability<1x10 to the minus 10th power per day<1 x 10 to the minus 8th power in the temperature range
It can also be the frequency locked in the external standard 1, 2 or 10MHz.
Signal quality
--Parasitic signal (GPS band)<- 30 dBc
--Carrier phase noise 0.1 rad RMS typical integrated, 10 Hz to 10 kHz offset
signal level
--Rated signal level - 130 dBm (front panel RF connector)
-70 dBm (backplane RF connector - typical)
--Scope± 20 dB
--Resolution 0.1 dB
Signal content
--Distance code PRN 1-37 GPS
PRN 120-138 SBAS
(All 1023 G1/G2 codes are supported)
Open/close control
--Data information GPS 50 bps, SBAS 250 bps, and FEC 500 sps
(User definable content)
Connection
--RF output N-type inner hole coaxial cable (front), SMA type inner hole coaxial cable (back)
--External standard In BNC female coaxial cable
--External trigger In BNC inner hole coaxial cable
--Internal 10MHz Out BNC female coaxial cable
--Other signal 15 way 'D' connector (1PPS in/out, code clock, distance code, navigation data bit, code epoch)
size
--H x W x D 99 x 254 x 345mm (3.9 x 10 x 13.6 inches)
weight
--About 5kg (11lb)
Copyright Shenzhen Zhongtai Instrument Co., Ltd. Tel.: 0755-23084885 Fax: 0755-23000265
Contact: Mr. Xiao 13760200976 Mr. Yang 13760220079
E-mail: zhongtaiyq@163.com Address: Room 1002, Guangfu Business Building, Baoyuan Road, Bao'an West Township, Shenzhen
粤ICP备17052778号